Husqvarna NUDA 900 MY12 страница 19 Скачать руководство пользователя

Страница: 19 / 49

SPECIFICATIONS - OPERATION - MAINTENANCE

EN - 19

INSTRUCTIONS FOR USING THE MOTORCY-

CLE

NOTE*: If you are not familiar with op

erating a motorcycle, read the instruc

tions in the “CONTROLS” section before

riding this motorcycle.

PRE-RIDE CHECKS

Any time you ride your motorcycle, make a general in-

spection first and proceed to check the following:

- check fuel level and engine oil level;

- check brake fluid level;

- check the steering by turning the handlebar both ways,

fully home;

- check the tyre pressure;

- check the chain tension;

- check the throttle control and adjust it, if necessary;

- turn the ignition switch to ON position: check dashboard

display lighting;

- check that parking lights, low beam and high beam

come on, as well as the relevant warning light;

- operate the turning indicators and check that the warn-

ing light comes on;

- check if the rear stop light is functioning.

Running the engine in correctly is essential for ensuring

engine longevity and functionality.

Bendy roads and gradients are ideal for running in the

engine, brakes and suspension effectively.

Vary your riding speed during the running in period.

This ensures that components operate in "loaded" con-

ditions and then "unloaded" conditions, allowing the

engine components to cool.

Although it is important to stretch engine components

during run-in, make sure you do not overdo it.

Optimum performance during accelera

tion is only obtained after the first 1000

km (625 mi) of running in.

Follow these guidelines:

do not fully open the throttle grip abruptly at low engine

speeds, either during or after the running in period.

During the first 100 Km (62 miles) use the brakes gently,

avoiding sudden or prolonged braking.

This allows the brake pad friction material to bed in cor-

rectly with the brake discs.

During the first 1000 km (625 miles), never exceed 7000

rpm (see table).

After the first 1000 km (625 mi), have

the checks indicated in the Scheduled

Maintenance Chart performed to avoid

causing injury to yourself or others and

/or damage to the vehicle.

After 1000 km (625 miles) you can expect better engine

performance but without exceeding the maximum rpm

allowed (9000 rpm).

Recommended maximum engine rpm:

km (mi) covered

rpm

0-1000 (0-625) .....................................................7000

over 1000 (625) ...................................................9000

Содержание NUDA 900 MY12


















































Результаты поиска

Содержание NUDA 900 MY12

Отзывы:

Похожие инструкции для NUDA 900 MY12

Бренды по названию

Популярные бренды

Husqvarna NUDA 900 MY12, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание NUDA 900 MY12

Отзывы:

Похожие инструкции для NUDA 900 MY12

Бренды по названию

Популярные бренды