6 CONTROLS
18
–
Operating the hand brake lever
–
Operating the foot brake lever
–
Operating the clutch lever
–
Turning the throttle grip beyond the basic position
–
Control of the motorcycle traction control (
MTC
)
–
Slip at the rear wheel or lifting front wheel
–
A malfunction occurring, which impairs the cruise control sys-
tem function
–
Exceeding the target speed for more than 30 seconds when
overtaking
Warning
Danger of accidents
The cruise control system func-
tion is not suitable for all riding situations.
The selected target speed will not be reached, if the
engine power is not sufficient for a gradient.
The selected target speed will be exceeded if the engine
braking effect is not sufficient on an incline.
–
Do not use the cruise control systems function on
winding roads.
–
Do not use the cruise control systems on slippery
road surfaces (e.g. rain, ice or snow), where there
is poor visibility or on unpaved surfaces (e.g. sand,
stones or gravel).
–
Do not use the cruise control systems function if the
traffic does not permit a constant speed.
The cruise control system function is only available when motor-
cycle traction control (
MTC
) is activated.
When motorcycle traction control (
MTC
) is switched off, the
cruise control system function is also switched off.
The cruise control system function cannot be activated during
rapid acceleration.
The cruise control function can only be activated in 2nd, 3rd, 4th,
5th and 6th gear.
The control range is from 30 to 160 km/h or from 18 to 98 mph.
6.4.4
Menu buttons
V02350-10
The menu buttons are fitted in the middle of the left combination
switch.
The menu buttons are used to control the display on the combi-
nation instrument.
Button
1
is the
UP
button.
Button
2
is the
DOWN
button.
Button
3
is the
SET
button.
Button
4
is the
BACK
button.
