Husqvarna LH 700, Руководство оператора

Страница: 12 / 36

6. Set the throttle control to full throttle.
Indicators for battery charge and oil pressure
The indicator for oil pressure (A) comes on if the oil
pressure is too low. The indicator for battery charge (B)
comes on if the battery does not charge correctly.
A
B
To operate the product (LH 700)
Always operate the product with the throttle control set
to full throttle.
• To operate the product forward, move the operation
control fully forward and release it.
• To operate the product rearward, move the operation
control fully rearward and release it..
• To stop the movement of the product, move the
operation control in the opposite direction in small
movements until the product is stationary.
• To change direction, turn the product around by the
handle.
To stop the product (LH 700)
1. Park the product on level ground.
2. Set the throttle control to idle speed.
3. Let the engine operate at idle speed for 2–3 minutes.
4. Set the throttle control to the stop position.
5. Turn the ignition key to the stop position (A).
A
6. Remove the ignition key to prevent accidental start.
Receiver (LH 804)
The receiver is found behind the rear cover of the
product.
LED indicator on the receiver
The LED indicator on the receiver shows the state of
connection to the remote control.
12 1177 - 001 - 02.04.2020