Husqvarna FE 450, Руководство пользователя

Страница: 87 / 128

15 ELECTRICAL SYSTEM
85
15.1 Removing the battery
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
1 m (3 ft)
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
9 V
–
Dispose of batteries with less than the minimum voltage correctly.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the air filter box cover. ( p. 56)
–
Remove the seat. ( p. 55)
H01190-10
Main work
–
Pull back the negative terminal cover

and disconnect negative cable

from
the battery.
–
Pull back the positive terminal cover

and disconnect positive cable

from
the battery.
–
Remove screw

.
–
Pull holding bracket

forward and remove battery toward the top.
15.2 Installing the battery
H00388-10
Main work
–
Insert the battery into the battery compartment with the terminals facing forward
and secure with holding bracket
 .
Battery (HJTZ5S-FP) ( p. 114)
–
Mount and tighten screw

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Info
Contact disks

must be mounted under screws

and cable sock-
ets

with the claws toward the battery terminal.
–
Connect positive cable

to the battery.
Guideline
Screw, battery terminal M5 2.5 Nm
(1.84 lbf ft)