Husqvarna F2401U1, Руководство пользователя

Страница: 77 / 174

SERVICE WORK ON THE CHASSIS 11
75
11.32 Installing the main silencer
S02335-10
(All models apart from special models)
–
Position the main silencer.
–
Mount screws
1
with the washers, but do not tighten
yet.
K01082-11
–
Attach spring
2
.
Spring hook (50305017000C1)
–
Tighten screws
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
A00511-10
(ROCKSTAR EDITION)
–
Position the main silencer.
–
Mount screws
1
with the washers, but do not tighten
yet.
A00512-11
–
Attach spring
2
.
Spring hook (50305017000C1)
–
Tighten screws
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
11.33 Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper “burns” out.
Not only is the noise level higher, but the performance characteristics change.