Husqvarna F2401U1, Руководство пользователя

Страница: 64 / 174

11 SERVICE WORK ON THE CHASSIS
62
H01182-11
–
Position the fork legs.
Air bleeder screw
5
of the right fork leg is posi-
tioned to the front.
Valve
A
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end
of the fork legs. The second milled groove (from
the top) must be flush with the upper edge of the
upper triple clamp.
The air suspension is located in the left fork leg.
The pressure and rebound damping is located in
the right fork leg.
A00514-10
–
Tighten screws
6
.
Guideline
Screw, bottom
triple clamp M8 12 Nm (8.9 lbf ft)
A00510-10
–
Tighten screw
4
.
Guideline
Screw, top steering
head M20x1.5 12 Nm (8.9 lbf ft)
A00510-11
–
Mount and tighten screw
7
.
Guideline
Screw, top
steering stem M8 20 Nm (14.8 lbf ft)
Loctite
®
243™
A00509-11
–
Using a plastic hammer, tap lightly on the upper triple
clamp to avoid stresses.
–
Tighten screws
8
.
Guideline
Screw, top triple
clamp M8 17 Nm (12.5 lbf ft)
–
Secure the wiring harness with cable holder
9
on the
left.