Husqvarna F2203V4, Руководство пользователя, Страница: 151 / 166

TECHNICAL DATA 23
149
Spring length 260 mm (10.24 in)
Gas pressure 10 bar (145 psi)
Static sag 37 mm (1.46 in)
Riding sag 110 mm (4.33 in)
Fitted length 477 mm (18.78 in)
Shock absorber oil Shock absorber fluid (SAE 2.5)
(50180751S1) (
p. 153)
23.9 Chassis tightening torques
Fitting, inlet sleeve to throttle
valve body - 2.8 Nm (2.07 lbf ft)
Hose clamp, radiator - 2.4 Nm (1.77 lbf ft)
Hose connector, active carbon
filter - 5 Nm (3.7 lbf ft)
Remaining screws, chassis EJOT PT
®
K60x25
‑
Z 1 Nm (0.7 lbf ft)
Screw cap, inner membrane (US) EJOT PT
®
30x5.5 1 Nm (0.7 lbf ft)
Screw cap, outer membrane (US) EJOT PT
®
35x25 0.8 Nm (0.59 lbf ft)
Screw for spoiler attachment
EJOT PT
®
K60x23/18 2.5 Nm (1.84 lbf ft)
Screw, air filter box, on subframe EJOT PT
®
K70x25 5 Nm (3.7 lbf ft)
Screw, combination switch EJOT PT
®
K50x18 2 Nm (1.5 lbf ft)
Screw, fuel pump (EU)
EJOT PT ®
K60x25-Z 2.5 Nm (1.84 lbf ft)
Screw, intake air temperature sen-
sor (EU) EJOT PT
®
K50x18 0.7 Nm (0.52 lbf ft)
Screw, pressure regulator (EU) EJOT PT
®
K60x25
‑
Z 2.3 Nm (1.7 lbf ft)
Screw, start button M3 0.4 Nm (0.3 lbf ft)
Screw, emergency OFF switch
(EU) M4 0.4 Nm (0.3 lbf ft)
Screw, fixed grip M4 5 Nm (3.7 lbf ft)
Loctite
®
243™
Screw, stop button (US) M4 0.4 Nm (0.3 lbf ft)
Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft)
Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft)
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft)
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft)
Screw, brake line guide on link
fork M5 5 Nm (3.7 lbf ft)
Screw, frame protector M5 3 Nm (2.2 lbf ft)
Screw, fuel pump (US) M5 3.5 Nm (2.58 lbf ft)
Screw, ground wire in tail section M5 5 Nm (3.7 lbf ft)
Screw, intake air temperature sen-
sor (US) M5 3 Nm (2.2 lbf ft)
Screw, shock absorber adjusting
ring M5 5 Nm (3.7 lbf ft)
Screw, throttle valve body cover M5 2.6 Nm (1.92 lbf ft)
Screws on main silencer M5 7 Nm (5.2 lbf ft)