Husqvarna DXR 145, Руководство оператора, Страница: 46 / 120

Position Movement
7 Arm 2 down.
8 Arm 2 up.
9 Arm 3 up.
10 Arm 3 down.
11 Arm 1 and 2 out.
12 Arm 1 and 2 in.
13 Tool in. The function also operates when the right top button is pushed down. Arm 1 and 2 can be
operated in parallel and when you move the tool when the right top button is pushed down.
14 Tool out. The function also operates when the right top button is pushed down. Arm 1 and 2 can be
operated in parallel and when you move the tool when the right top button is pushed down.
15 Rotate the tower counterclockwise.
16 Rotate the tower clockwise.
"Pattern 4"
The operation mode switch on the remote control is
used to select between work mode and transport mode.
Refer to Operation modes on page 60 .
Work mode or transport mode and crawl selected:
4 3
1
2
9 5
7
10 6
8
12
14
11
13
Position Movement
1 Rotate the tower counterclockwise.
2 Rotate the tower clockwise.
3 Arm 3 up.
4 Arm 3 down.
5 DXR 315: Telescopic arm out.
46 1401 - 002 - 15.10.2021