Husqvarna DE 110, Руководство оператора

Страница: 20 / 96

Warnings on the control panel (DE 110/DE120)
CAUTION:
Do not operate the product
if the red light comes on. If the initial solution
does not remove the error, speak with an
approved service agent before you operate
the product again.
Symbol Signal Cause Solution
Buzzer signal
and the red
light comes on.
The prefilter is clogged. Do a filter purge procedure, refer to To re-
move dust particles from the prefilter during
operation on page 15 .
Incorrect hose is connected or
selected in the control panel.
Attach correct hose or select the correct
hose dimension on control panel.
The hose is damaged or com-
pressed.
Replace the hose.
The hose is clogged. Clear the hose.
The red light
flashes.
The main vacuum hose is dis-
connected.
Let an approved service agent repair the
product.
Red light
comes on.
The HEPA filter is missing, full or
damaged.
Do a check of the HEPA filter, replace if nec-
essary. Refer to
To replace the HEPA filter
on page 18
.
Red light
comes on.
The control unit is damaged. Let an approved service agent repair the
product.
Too high ambient temperature. Make sure that the ambient temperature is in
specified range when you use the product.
Warning. Look at the operation record of your Husq-
varna fleet app or speak to an approved
service agent.
Yellow light
comes on.
The HEPA filter is almost full. Replace the HEPA filter if necessary.
Red light
comes on.
The HEPA filter is full. Replace the HEPA filter.
Error codes
Error
code
Error Description Probable cause(s) Action(s)
2
HEPA filter miss-
ing.
Product shuts down/does not
start.
+ Warning light on HMI.
+ HEPA symbol on HMI.
HEPA filter is missing or dam-
aged.
Assemble or replace
the HEPA filter.
3
Low supply volt-
age.
Low performance (low air flow/
vacuum).
Too low voltage in grid/power
supply.
Make sure correct
grid/power supply is
used.
20 1587 - 007 - 24.01.2022