3. Pull the bag up from the bag holder and put it around
the container.
4. Tighten a strap around the bag and the container to
secure the bag to the container.
5. Pull the dust bag over the bag holder.
6. Close the bottom of the dust bag with a cable tie.
Maintenance
Introduction
When cleaning and doing service on the product,
disconnect the product from the dust extractor.
• The product must be cleaned before the product is
moved from the work area.
• All other equipment must be seen as contaminated.
• Use a cleaning room if it is possible.
• Correct personal protective equipment must be
used.
• All parts that are contaminated must be correctly
discarded in plastic bags after maintenance is done.
Refer to unhealthy dust such as silica dust.
Troubleshooting
Troubleshooting
Issue
Cause
Solution
Unsatisfactory suction
Damages on the hose
Replace the hose
The top cover is loose
Adjust the top cover
Dirt in the flap to the dust bag
Clean the flap
WARNING: Use
personal protective
equipment
Sealing is defective
Replace the sealing
The toggle latches are loose
Tighten the toggle latches
6
819 - 002 - 23.11.2018
Содержание C 3000
Страница 30: ...30 819 002 23 11 2018 ...
Страница 31: ...819 002 23 11 2018 31 ...