Problem
Cause
Solution
The motor does not
start.
A phase of the power supply is missing.
Do a check of the power supply.
A phase of the power supply is incorrect.
Adjust the phase.
The emergency stop button is engaged.
Turn the emergency stop button clockwise to
disengage.
There is no power in the drive system.
Start the drive system, then start the drum
motor.
A component is defective.
Replace the defective component.
The OPC is not installed.
Install the OPC.
The extension cable is disconnected or dam-
aged.
Connect the extension cable or if it is neces-
sary, replace the extension cable.
The product stops af-
ter a while.
The motor protection switch releases be-
cause of overload.
Decrease the cutting depth.
The motor has a defect.
Do a check of the motor.
The drive system
does not operate cor-
rectly.
The drive system pedals are not engaged.
Push the drive system pedals in.
Transportation, storage and disposal
Transportation
WARNING:
Be careful during
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
CAUTION:
Pull the lift lever before
transportation. The tools must not be against
the ground during transportation.
CAUTION:
Do not tow the product
behind a vehicle.
• The wheels let you move the product shorter
distances. For longer distances, lift the product to
move it or put the product on a vehicle.
• Put some type of protection on the product
during transportation. The protection keeps natural
elements such as rain and snow away from the
product.
To disengage and engage the drive
system
1. Push the outer ends of the drive system pedals to
disengage the drive system.
1816 - 001 - 05.04.2022
31
