Husqvarna BMC 335, Руководство оператора

Страница: 13 / 148

8. Install the side cover.
9. Install the support plate.
10. Do a check of the drive belt tension. Refer to
To do a
check of the drive belt tension on page 22
.
Diamond blades and spacers for different
operation widths
Operation width,
mm
Quantity of dia-
mond blades
Quantity of
spacers, 2.5 mm
340 80 85
300 71 92
250 59 100
200 47 108
150 35 116
100 24 125
50 12 133
To adjust the height of the front wheels
The standard position is (B). Position (A) is used for
operation at maximum depth. Position (C) is used for
operation at minimum depth.
A
B
C
1. Loosen the bolts (D) on each side of the front wheel
bar.
D
D
E
2. Turn the nut (E) to set the applicable height.
3. Tighten the bolts (D) on each side of the front wheel
bar.
1816 - 001 - 05.04.2022 13