Husqvarna 967036502, Руководство оператора

Страница: 19 / 40

Stopping the Engine
1. Move the throttle to the minimum position (tortoise
symbol).
2. Move the steering controls outward.
3. Disengage the mower deck by pressing the blade switch
down.
4. Raise the mower deck by pressing the release button on
the lever and pulling the lever upward to the transport
position.
IMPORTANT INFORMATION leaving the ignition switch
in any other position than oFF will cause the battery to be
discharged.
5. When the machine is standing still, activate the park brake
by pushing the lever release button and pulling the lever
upward.
If the engine has been worked hard, allow it to idle at
least 60 seconds to attain a normal operating temperature
before stopping. To prevent fouling the spark plugs, avoid
idling the engine for longer periods.
6. Turn the ignition key to the stop position. Remove key.
Always remove key when leaving the mower to prevent
unauthorized use.
WARNING! Never drive the rider on terrain that
slopes more than 10 degrees. Mow slopes up and down,
never side to side. Avoid sudden directional changes.
Operating On Hills
Read the Safety Instructions Driving on Slopes in the
Safety
section.
• The slowest speed possible should be used before starting
up or down hills.
• Avoid stopping or changing speed on hills.
• If stopping is absolutely necessary, pull steering controls
into the neutral position and push to the outside of the unit.
Engage the park brake.
• To restart movement, release the park brake.
• Pull the control levers back to the center of the mower and
press forward to regain forward motion.
• Make all turns slowly.
19
oPERATIoN