background image

 

KEY 

 

T

 

O SYMBOLS

 

2

 

 – 

 

English

 

Symbols

 

W

 

ARNING! Clearing saws, 

brushcutters and trimmers can be 
dangerous! Careless or incorrect use 
can result in serious or fatal injury to 
the operator or others.

Please read the operator’s manual 
carefully and make sure you 
understand the instructions before 
using the machine.

Always wear:

Wear a protective helmet where 
there is a risk of falling objects

Approved hearing protection

Approved eye protection

 

Max. speed of output shaft, rpm

 

Watch out for thrown objects and 
ricochets.

The operator of the machine must 
ensure, while working, that no persons or 
animals come closer than 15 meters (50 
ft.).

Machines fitted with saw blades or grass 
blades can be thrown violently to the side 
when the blade comes into contact with a 
fixed object. The blade is capable of 
amputating an arm or leg. Always keep 
people and animals at least 15 meters from the machine.

Arrows which show limits for handle 
positioning.

 

Always wear approved protective gloves.

 

Wear sturdy, non-slip boots.

 

Only use non-metallic, flexible cutting 
attachments, i.e. trimmer heads with 
trimmer cord.

 

Primer bulb

 

Set the choke control in the choke position.

 

 

 

 

Starting instructions

 

 

Other symbols/decals on the mac

 

hine refer to 

special certification requirements for certain 
markets.

 

The engine is s

 

witched off by moving the 

stop switch to the stop position. 
CAUTION! The stop switch automatically 
returns to the start position. In order to 
prevent unintentional starting, the spark 
plug cap must be removed from the spark plug when 
assembling, checking and/or performing maintenance. 

 

Always wear approved protective gloves.

 

Regular cleaning is required.

 

Visual check.

 

Approved eye protection must always be 
used.

50FT

15 m

50FT

15 m

1.

2.

3.

4.

The engine exhaust from this product

contains chemicals known to the State

of California to cause cancer, birth

defects or other reproductive harm.

Содержание 535RJ



































Отзывы: