manualshive.com logo in svg

Husqvarna 520iRX, Руководство оператора, Страница: 4 / 36

Поделиться
Скачать
Husqvarna 520iRX Скачать руководство пользователя страница 4

Symbols on the battery and/or on

the battery charger

Recycle this product at a

recycling station for elec-

trical and electronic equip-

ment. (Applies to Europe

only)

Fail-safe transformer.

Use and keep the battery charger indoors

only.

Double insulation.

Product liability

As referred to in the product liability laws, we are not

liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from

the manufacturer or not approved by the

manufacturer.

• the product has an accessory that is not from the

manufacturer or not approved by the manufacturer.

• the product is not repaired at an approved service

center or by an approved authority.

Safety

Safety definitions
Warnings, cautions and notes

are used to point out specially

important parts of the manual.

WARNING: Used if there

is a risk of injury or death

for the operator or

bystanders if the

instructions in the

manual are not obeyed.

CAUTION: Used if there

is a risk of damage to the

product, other materials

or the adjacent area if

the instructions in the

manual are not obeyed.

Note: Used to give more

information that is necessary in

a given situation.

General power tool safety

warnings

WARNING: Read all

safety warnings and all

instructions. Failure to

follow the warnings and

instructions may result in

electric shock, fire and/or

serious injury.

Note: Save all warnings and

instructions for future

reference. The term "power

tool" in the warnings refers to

your mains-operated (corded)

4

757 - 001 - 24.10.2018

Содержание 520iRX





































Отзывы:

Нет отзывов