manualshive.com logo in svg

Husqvarna 520iRX, Руководство оператора, Страница: 29 / 36

Поделиться
Скачать
Husqvarna 520iRX Скачать руководство пользователя страница 29

Troubleshooting

Keypad

LED display

Possible faults

Possible action

Green activate LED flashing.

Low battery voltage.

Charge the battery.

Identifying the cutting tool.

Release the throttle.

Red error LED flashing.

The power trigger and the acti-

vate button are pressed at the

same time.

Release the power trigger and the product is

active.

Overload.

The cutting attachment is jammed. deacti-

vate the product.

Remove the battery. Clean the cutting at-

tachment from unwanted materials.

Temperature deviation.

Let the product cool down.

The product does not start.

Dirt in the battery connectors.

Clean the battery connectors with com-

pressed air or a soft brush.

Error LED is lit with red light.

The product needs servicing.

Contact your servicing agent.

Battery

Problem

Possible faults

Possible solution

Green LED flashes.

Low battery voltage.

Charge the battery.

Red error LED flashes.

The battery is empty.

Charge the battery.

Temperature deviation.

Use the battery in temperatures between

-10°C (14°F) and 40°C (104°F).

Overvoltage.

Remove the battery from the battery charger.

Red error LED comes on.

Cell difference is to much (1V).

Speak to your servicing dealer.

757 - 001 - 24.10.2018

29

Содержание 520iRX





































Отзывы:

Нет отзывов