background image

English – 

5

4. Vibration damping system

The hedge trimmer is
equipped with a vibration
damping system, which is
designed to give as vibra-
tion-free and comfortable
use as possible.

The hedge trimmer’s
vibration damping system
reduces the transfer of
vibrations between the
engine unit/blades and the
hedge trimmer’s

 

handles.

The engine body including
the blades is suspended on
the handlebar system via a
four springs.

SAFETY INSTRUCTIONS

!

WARNING!
Over exposure to vibrations can result in
blood-vessel or nerve injury to persons
suffering with blood circulation problems.
Seek medical attention if you experience
physical symptoms that can be related to
over exposure to vibrations. Examples of
such symptoms are ”numbness”, lack of
feeling, ”tickling”, ”pricking”, ”pain”, lack
of or a reduction in normal strength,
changes in the colour of the skin or its
surfaces. These symptoms normally appear
in the fingers, hands or wrists.

6. Blade guard
(326HDA55)

The blade guard (A) is
intended to protect against
any part of the body coming
into contact with the blades
(B).

5. Muffler

The muffler is designed to give
the lowest possible noise level
and to direct the engine‘s
exhaust fumes away from the
operator. Muffler fitted with
catalytic converter is also
designed to reduce harmful
exhaust components.
In countries that have a warm
and dry climate the risk of fire
is obvious. We have therefore
fitted certain mufflers with a
spark arrest screen. Make sure
that your muffler is fitted with
this kind of screen. It is
extremely important that the instructions for checking,
maintaining and servicing the muffler are followed. (See the
section “Control, maintenance and service of the machine‘s safety
equipment“.
)

!

WARNING!
Mufflers fitted with catalytic converters
become extremely hot during use and
after stopping. This also applies at idling
speeds. Contact can result in burns to
the skin. Be observant to the risk of fire!

!

WARNING!
Bear in mind that exhaust fumes:
• contain carbon monoxide, which can

cause carbon monoxide poisoning.
Therefore never start or run the machine
indoors.

• are hot and can contain sparks that can

cause fires. Never start the machine
indoors or close to inflammable material.

A

B

Содержание 326HDA55X-Series, 326HE3X-Seri

























Отзывы: