background image

2

 – English

SYMBOL EXPLANATION

WARNING! The hedge trimmer
can be dangerous!
Careless or incorrect use can result in
serious, even fatal injury.

Read through the Operator‘s
Manual carefully and understand the
content before using the hedge
trimmer.

Always use
• Ear protection
• Approved eye protection

Symbols

• This product is in accordance with

applicable CE directives.

• Always wear approved protective

gloves.

• Cutting tool. Do not touch the

tool without first switching off the
engine.

Checks and/or maintenance should be
carried out with the engine switched off,
with the stop switch in the STOP
position.

Always use approved protective gloves.

Regular cleaning required.

Ocular control.

Approved eye protection must always be
used.

Other symbols/decals on the machine refer to
special certification requirements for certain
markets.

• Use anti-slip and stable boots.

• This machine is not electrically

insulated. If the machine touches
or comes close to live electricity
lines, it could cause death or
serious injury. Electricity can
jump from one point to another in
the form of a high-voltage arc.
The higher the voltage, the further
the electricity can jump.
Electricity can also be conducted
by branches and other objects,
especially if they are wet. Always
keep a distance of at least 10 m
(30 ft) between the machine and
live electricity lines and/or objects
that are touching them. If you
have to work closer than this,
always contact the relevant power
company to make sure the power
is switched off before you start
your work.
This machine has a long reach.
Make sure that no people or
animals come closer than 15 m
(45 ft) when the machine is
running.

• Arrows which show limits for handle

mounting.

Содержание 326HDA55X-Series, 326HE3X-Seri

























Отзывы: