![Husqvarna 2016 FE 250 Скачать руководство пользователя страница 89](http://html.mh-extra.com/html/husqvarna/2016-fe-250/2016-fe-250_owners-manual_172604089.webp)
15 ELECTRICAL SYSTEM
87
S00894-10
–
Position brake line
and wiring harness
in the brake line guide.
Finishing work
–
Check the headlight setting. (
15.8
Changing the headlight bulb
Note
Damage to reflector
Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
S00507-10
Main work
(FE EU/AU)
–
Turn protection cap
together with the underlying bulb socket counter-
clockwise all the way and remove it.
–
Pull bulb socket
of the parking light out of the reflector.
M00433-10
(FE US)
–
Turn protection cap
together with the underlying bulb socket counter-
clockwise all the way and remove it.
–
Pull bulb socket
of the parking light out of the reflector.
B01563-10
–
Pull out headlight bulb
.
–
Insert the new headlight bulb.
Headlight (HS1/socket PX43t) (
–
Insert the protection cap with the bulb socket into the reflector and turn it clock-
wise all the way.
Info
Ensure that O-ring
is seated properly.
–
Insert the bulb socket of the parking light into the reflector.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (