background image

6

SAFETY RULES

SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS

• 

Keep machine free of grass, leaves, or other 

debris buildup. Clean oil or fuel spillage. Allow 

machine to cool before storing.

•  Stop and inspect the equipment if you strike an 

object. Repair, if necessary, before restarting.

•  Never make adjustments or repairs with the 

engine running.

•  Grass catcher components are subject to wear, 

damage, and deterioration, which could expose 

moving parts or allow objects to be thrown. 

Frequently check components and replace 

with manufacturer’s recommended parts, when 

necessary.

•  Mower blades are sharp and can cut. Wrap the 

blade(s) or wear gloves, and use extra caution 

when servicing them.

•  Check brake operation frequently. Adjust and 

service as shown in the Operator’s Manual.

WARNING!

DO NOT tow any trailers, etc. with this 

mower.  They may jackknife or over 

turn causing damage to the mower and 

possibly serious injury to the operator.

WARNING!

Battery posts, terminals and related 

accessories contain lead and lead 

compounds, chemicals know to the 

State of California to cause cancer 

and birth defects or other reproductive 

harm. Wash hands after handling.

Содержание 115 149727 R01

























Отзывы: