background image

532 40 70-01 Rev. 2   09.01.06   BY 

Printed in U.S.A.

S

E

C

T

ION 1:

  L

IMIT

E

D

 W

A

R

R

A

N

T

Y

  

  

Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original pur

-

chaser to be free from defects in material and workmanship from the date of purchase for the “W

arranty 

Period” of the product as set forth below:

Lifetime W

arran

ty:

  

All tiller tines against breakage, trimmer shafts, ignition coils and modules on hand 

held prod 

uct.

3 Y

ear 

W

arranty:

  Spindles (on Zero T

urn Riders and Commercial W

alk-Behinds)

2 Y

ear 

COMMERCIAL-W

arranty:

  Husqvarna Commercial T

urf Equipment—zero turn riders, wide area 

walks, and ground engaging commercial equipment.

2 Y

ear 

NON-COMMERCIAL

 W

arranty:

 Automatic Mower

, Riding lawn mowers, yard and garden tractors

walk behind mowers, tillers, chain saws, trimmers, brushcutters, clearing saws, snow blowers, handheld 

blowers, backpack 

blowers, hedge trimmers, electrical products and power

-assist collectio

n systems for 

non 

com 

mer 

cial, nonprofessional, noninstitutional or noninc

ome producing use, except as herein stated

.

  

  

Emission control system components necessary to comply with CARB-TIER-II and EP

A

 regulations, 

except for those co

mponents which are part of engine systems manufactured by third party engine manu-

facturers for which the purchaser has received a separate warranty with product information supplied at 

time of purchase.

1 Y

ear 

W

arranty:

  Power cutters, stump grinder

, pole pruners and pole saws for 

non-commercial, non-pro-

fessional, non-institutional or non-income producing use

All trimmers, brushcutters, clearing saws, hover

-

ing trimmers, stick edgers, backpack blowers, hand held blowers, hedge trimmers, power

-assist collection 

systems used for commercial, institutional, professional or income producing purposes or use

.

Batteries

 have a one-year prorated limited warranty with 100% replacement during the fi

 rst 6 months.

90 Day W

arranty:

  

Automatic Mower

, Chain saws, power cutters, stump grinders, pole saws, pole prun-

ers, snow throwers, model series 580 & 600 walk-behind mowers and commercial turf equipment or any 

Husqvarna product used for commercial, institutional, professional, or income producing purposes or use 

except as otherwise provided herein

.

Husqvarna Safety 

Apparel 

carries a 

90-day warranty from the date of the customer’s original purchase 

for defects in

 ma

terial and workmanship. Normal wear

, tear or abuse is not covered under warranty

. Prod-

uct must be returned to Charlotte with a warranty claim form. 

All care and maintenance instructions must 

be followed as stated by the manufacturer on the care label. The fi

 t 

of the protective apparel/boot is not 

covered under warranty

.

30 Day W

arranty:

  Replacement parts, accessories including bars and chains, tools and display items. 

S

E

C

T

ION 2:

  H

U

S

QV

A

R

N

A

’S OB

L

IG

A

TION

S U

N

D

E

R

 TH

E

 W

A

R

R

A

N

T

Y

  

  

Husqvarna will repair or replace defective components without charge for parts or labor if a 

component 

fails because of a defect in material or workmanship during the warranty period.

S

E

C

T

ION 3:

  IT

E

MS NOT COV

E

R

E

D

 B

Y

 TH

IS

 W

A

R

R

A

N

T

Y

The following items are no

t covered by this warranty:

(1)Normal customer maintenance items which become worn through normal regular use, including, but  

  

  

not limited to, belts, blades, blade adapters, bulbs, fi

 lters, guide bars, lubricants, rewind springs, saw  

    

chain, 

spark 

plugs, 

starte

r ropes and tines;

(2)Natural discoloration of material due to ultraviolet light;

(3)Engine and drive systems not manufactured by Husqvarna; these items are covered by the respective  

    

manufacturer’s 

warranty 

as 

provided 

in 

writing 

wi

th the product information supplied at the time of pur

  

  

chase; all claims must be sent to the appropriate manufacturer;

(4)Lawn and garden attachments are covered by a third party which gives a warranty

all claims for

 war

  

  

ranty should be sent to the manufacturer; and

(5)Emission Control System components 

necessary to comply with CARB-TIER-II and EP

A

 regulations 

 

  

  

which are manufactured by third party engine manufacturer

S

E

C

T

ION 4:  

EXC

E

P

T

ION

S

 A

N

D

 L

IMIT

A

T

ION

S

This warranty shall be inapplicable to defects

 resulting from the following:

  

  

(1)Accident, abuse, misuse, negligence and neglect, including stale fuel

, dirt, abrasives, moisture, rust,  

  

  

  

  

 corrosion, or any adverse reaction due to incorrect storage or use habits;

    

(2)Failure 

to operate

 or maintain the unit in accordance with the Owner’s/Operator’s manua

l or instruc- 

         

tion sheet furnished by Husqvar

na;

  

  

(3)Alterations or modifi

 cations that change the intended use of the produc

t or affects the product’s per

         

formance, 

operatio

n, safety

, or durability

, or causes

 th

e product to fail to comply with any applicable  

         

laws; or:  

  

  

(4)Additional damage to parts or components due to continued use occurring after any of the above.  

REP

AIR OR REPLACEMENT 

AS PROVIDED UNDER THIS W

ARRANTY

 IS THE EXCLUSIVE 

REMEDY

 OF

 

THE PUR 

CHAS 

ER. HUSQV

ARNA

 SHALL

 NOT BE LIABLE FOR 

ANY

 INCIDENT

AL

 OR CONSEQUENTIAL

 

DAMAGES FOR BREACH OF

 AN

Y

 EXPRESS 

OR IMPLIED W

ARRANTY

 ON THESE PROD

UCTS 

EXCEPT 

TO

 THE EXTENT PROHIBITED BY

 APPLICABLE LA

W

ANY

 IM

PLIED W

ARRANTY

 OF

 MERCHANT

ABIL-

ITY

 OR FITNESS FOR 

A

 P

AR

TICULAR PURPOSE ON THESE PRODUCTS IS LIMITED IN DURA

TION T

THE W

ARRA

NTY

 PERIOD 

AS DEFINED IN THE LIMITED W

ARRA

NTY

 ST

A

TEME

NT

. HUSQV

ARNA

 RE-

 SER

VES THE RIGHT T

O CHANGE OR IMPROVE THE DESIGN OF

 THE PRODUCT WITHOUT NO 

TICE, 

AND DOES NOT 

ASSUME OBLIGA

TION T

O UPDA

TE PREVIOUSL

Y

 MANUF

ACTURED PROD 

UCTS.

    

Some states do not 

allow the exclusion of incidental or consequential damages, or limitations on how long 

an implied warranty lasts, so the 

above limitations or exclusions may not apply to you. This warranty gives 

you specifi

 c legal rights, and you may also have othe

r rights which vary from state to state. 

S

E

C

T

ION 5:  

C

U

ST

O

M

E

R

 R

E

S

P

ON

S

IB

IL

IT

IE

S

  

  

The product must exhibit reasonable care, maintenance, operatio

n, storage

 and general upkeep as written 

in the maint

enance section of the Owner’s/Operator’s manual. Should an operational problem or failure occur

the product should not be used, but delivered as is to an authorized Husqvarna dealer for evaluati

on. Proof 

of purchase, as explain

ed in section 6, rests solely with the customer

S

E

C

T

ION 6:  

P

ROC

E

D

U

R

E

 TO

 O

B

TA

IN

 W

A

R

R

A

N

T

Y

 CON

S

ID

E

R

A

T

ION

    

It 

is 

the 

Own

er’s and Dealer’s responsibility to make certain that the W

arranty Registration Card is properly 

fi 

lled out and mailed

 to Hu

sqvarna 

Forest & Garden Company

. This card should be mailed within ten (10) days 

from the date of purchase in order to confi

 rm the warranty and to facilitate post-sale service.

  

  

Proof of purchase must be presented to the authorized Husqva

rna dealer in order to obtain warranty ser

-

vice. This proof must includ

e date purchased, model number

, serial number

, and complete name and address 

of the selling dealer

.

  

  

T

o obtain the benefi

 t of this warranty

, the product believed to be defective must be delivered to an au-

thorized 

Husqvarna dealer in a timely manner

, no later than thirty (30) days from date of the operational 

problem or failure. The product must be delivered at the 

owner’s expense. 

Pick-up and delive

ry charge

s are 

not covere

d by this warranty

An authorized Husqvarna dealer can be normally located through the “Y

ellow 

Pages” of the local telephone directory or by calling 1-800-HUSKY62 for a dealer in your area.

H

U

S

QV

A

R

N

A

 

7349

 S

tatesvi

lle 

R

o

ad

C

harl

ott

e, N

C

  

28269

531 83 81-23    2002

WA

R

RANTY

 ST

A

TEMENT

Содержание 1130SBE-OV

































Отзывы: