Assembly instructions
bedstead Couch
Frame
· Assemble frame sections (1a, 1b, 1c, 1d).
· The Hüsler Nest logo on the parts for the side
of the bedstead (1b, 1d) face inwards.
Headboard (optional)
· Position section (1a) with screw holes for
headboard at the head of the bed.
Base
· Insert plastic latches (2a) into the longitudinal
supports.
· Push longitudinal supports (2b) underneath the
head and foot sections (2c), assemble and hold
in place using plastic latches (2e).
· Screw holes (2d) must face outwards.
· For the double couch, the holes (2f) on the two
inner longitudinal supports must face inwards.
Leg sections (optional)
· Assemble leg sections (3a) and (3b).
Upper edge must be flush.
Applies to bench support.
Secure leg sections
· Insert wooden dowels (4a) into the countersunk
holes.
· Place leg sections (4b) underneath the longitudinal
supports (4c) and secure with wooden screws
(use a coin or wood screwdriver).
1
1a
1d
1c
1b
2
3
4
2c
2f
2d
2b
2b
2d
2f
2b
2a
2e
4a
4b
4c
4b
3b
3a
