Assembly
1
Attaching the cabinet handle
Position the cabinet handle (B) over the holes on the
cabinet (A).
Attach with the bolts (BB) and tighten with supplied
hex key (CC).
NOTE
:
The holes in the cabinet are tapped and do not
require nuts.
HUSKYTOOLS.COM
5
Please contact 1-888-HD-HUSKY for further assistance.
Attaching the casters
□
□
□
Be sure the drawers are locked and lay the cabinet (A)
□
e
m
a
s
e
h
t
n
o
,
ti
n
u
e
h
t
o
t
)
D
(
s
r
e
t
s
a
c
l
e
v
i
w
s
e
h
t
h
c
a
t
t
A
side as the handle, inserting bolts (AA)
through the swivel
casters(D) and into the cabinet (A).
□
Tighten with supplied hex key (CC) or 12 mm wrench/socket.
□
Repeat this process for the xed casters (C) on the
opposite side of the cabinet (A).
□
Return the cabinet (A) to its upright position.
CAUTION:
Do not over tighten the bolts.
2
Operation
1
Removing the drawers
2
Re-inserting the drawers
Fully extend the empty drawer.
□
□
e
li
h
w
r
e
v
e
l
e
s
a
e
l
e
r
e
n
o
e
h
t
p
u
h
s
u
P
pulling
down on the other release lever.
□
Pull the drawer outward until it is released from the
drawer slide.
Extend the drawer slides.
□
□
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□
Once properly inserted, completely close the drawer
to set the slides in their proper positions.
CAUTION:
Two people are recommended for assembly.
A
B
BB
