background image

THANK YOU

 

We appreciate the trust and confidence you have placed in Husky through the purchase of this level. We 

strive to continually create quality products designed to enhance your home. Visit us online to see our 

full line of products available for your home improvement needs. Thank you for choosing Husky!

Warranty

If, within one year from date of purchase, this HUSKY® product fails due to a defect in materials or 

workmanship, please call the HUSKY® Service Center at 1-888-HD-HUSKY. Please keep a copy of the 

original Home Depot receipt for all warranty claims. This warranty excludes incidental/consequential 

damages and failures due to misuse, abuse, or normal wear and tear. This warranty gives you specific 

rights, and you may also have other rights, which vary from state to state. Please visit the store or call 

1-888-HD-HUSKY for details.
This warranty is in lieu of all other warranties expressed or implied.

Questions, problems, missing parts? Before returning to the store,  

call Husky Customer Service 

8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday

1-888-HD-HUSKY

HUSKYTOOLS.COM

USE AND CARE GUIDE

10 IN DIGITAL LEVEL

Questions, problems, missing parts?  
Before returning to the store, call  
Husky Customer Service 
8 a.m. - 7 p.m., EST, Monday-Friday 
9 a.m. - 6 p.m., EST, Saturday

1-888-HD-HUSKY

HUSKYTOOLS.COM

Item # 934 631

Safety Information

PLEASE READ AND SAVE THESE INSTRUCTIONS

CAUTION:

 Read, understand, and follow 

all safety rules and instructions before using 

this tool. These safety instructions should be 

followed at all times. Failing to follow these 

safety instructions could result in injury to 

yourself or others. Also, failing to read and 

follow these instructions may cause damage to 

your equipment.

WARNING:

 BE SURE TO read and understand 

all instructions. Failing to follow all instructions 

listed below may result in electric shock, fire, 

and/or serious personal injury.

WARNING:

 This battery-operated tool uses 

only “AAA” batteries. Using any other batteries 

may create a risk of fire.

WARNING:

 Carefully follow all instructions 

and warnings on the battery label and package.

WARNING:

 Remove dead batteries 

immediately and dispose of them according to 

your local ordinance.

WARNING:

 Always insert the batteries 

correctly. The polarity (+ and -) is marked on 

the batteries and on the tool. DO NOT:

…

…

Short the battery terminals.

…

…

Charge the batteries.

…

…

Mix old and new batteries. If either or 

both of the batteries are weak, replace 

both of them with two new batteries. 

These new batteries should match each 

other in brand and type.

…

…

Dispose of batteries in a fire.

WARNING:

 Keep batteries out of the reach 

of children.

WARNING:

 Remove batteries if the device 

will not be used for several days.

WARNING:

 Use only accessories that are 

recommended by the manufacturer for your 

model. Accessories that may be suitable for 

one tool may become hazardous when used on 

another tool.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions:
1.  This device may not cause harmful interference.
2.  This device must accept any interference received, 

including interference that may cause undesired 

operation.

Changes or modifications not expressly approved by the 

party responsible for compliance could void the user’s 

authority to operate the equipment.

NOTICE:

 This equipment has been tested and found 

to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against 

harmful interference in a residential installation. This 

equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there 

is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause 

harmful interference to radio or television reception, 

which can be determined by turning the equipment 

off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures: 

Reorient or relocate the receiving antenna. Increase the 

separation between the equipment and receiver. Connect 

the equipment into an outlet on a circuit different from 

that to which the receiver is connected. Consult the 

dealer or an experienced radio/TV technician for help.

Pre-Operation (continued)

3. 

 

– Use to convert angles to different units. Push to change the display units from degrees (°) to pitch 

(in/ft) to slope (%). Pitch readings are in 1/8 in/ft increments. Plus and minus signs indicate that the pitch is 

slightly more (+) or slightly less (–) than the pitch shown on the display.

4.  Reset

 – Absolute/Relative Angle Conversion button. When the level is turned on, it will be on absolute angle 

mode. To change to relative angle, press the Reset button. If you want to use the absolute angle again, turn off 

the level and power it on again.

5.  LCD Display

 – The display reads normally when the level is upside down. Once you turn on the tool, the first 

display is the temperature (in Fahrenheit). After about two seconds, it will automatically display the absolute 

angle in degrees.

6.  Working Base

 – When you lay your digital toolbox level on a flat surface, ensure that its working base is placed 

firmly on the working surface.

7.  Vial

 – When using the Digital Level to check level or plumb of the working surface, you can measure the surface 

by observing whether the bubble of the vial is in the center. You can use this function without batteries.

8.  Battery Compartment

 – Holds two AAA batteries.

9.  Hanging Hole

 – Hang the tool here for storage purposes.

SCREEN ICONS

 

Up/Down Indicator

 – Zero Line (0°) always indicates the level 

position. The bias and the right arrow indicate up or down, away 

from the level (0°).

 

Battery Capacity Icon

 – Indicates the power remaining in 

the batteries. Replace batteries if the black power bar has 

disappeared.

 

Beeper Icon

 – When the beeper function is active, this icon will 

appear on the screen.

Hold Icon

 – When the display reading is frozen, the “H” will blink.

Operation

CHANGING THE DISPLAY UNITS

1.  Press the 

 

button to convert the 

measurement units between degrees (°), 

pitch (in/ft), and slope (%). Figure 2 shows 

an example of the LCD display showing a 

degree measurement.

2.  Press the 

Hold

 button to capture the 

temporary reading.

Figure 2

3.  Press the 

 button to shift to in./

Ft unit. Figures 3 and 4 show the pitch 

H=67/8 inch (H=L*tan 

α

, L=1feet, 

α

 = 

30.0°).

Figure 3

Figure 4

 H = L * tan

α

α

L

H

4.  Press the 

 button again to get the slope 

of the surface H=57.7cm (H=L*tan 

α

, L=100 cm, 

α

=30.0°), as shown in Figures 5 and 6.

Figure 5

Figure 6

 H = L * tan

α

α

L

H

Operation (continued)

If the angle is greater than 45° but less than 90°, 

the slope of the surface is H=L / tan 

α

  

(see Figure 7).

Figure 7

(45˚ < 

α 

< 90˚)

α

 H = L / tan

α

L

H

ABSOLUTE ANGLE MEASUREMENT

1.  Lay the digital level on a surface, ensuring the base sits flat against the surface. The level has two magnets 

in the bottom to secure it to steel surfaces. If necessary, you can turn the digital level upside down during 

measuring. The display will continue to read normally.

2.  Once you turn the level on, the display figure indicates the absolute angle between the level and the working 

surface.

3.  While the angle changes, the bias on the display shows the tilt trend of the tool while the right arrow points 

upward or downward.

4.  To activate the beeper, push the 

On/   /Off

 button. To deactivate, push it one more time.

5.  To change the display units for the measured angle, see the Changing the Display Units in the Operation section.

RELATIVE ANGLE MEASUREMENT

1.  Lay the digital level on the surface.
2.  Push the 

Reset

 button. The display reads 0.0°, while its top left corner shows the zero line. Move it to another 

working surface, and the relative angle between the two working surfaces will be displayed.

3.  To change the display units for the measured angle, see Changing the Display Units in the Operation section.
4.  To return to absolute angle measurement, turn off the level and power it on again.

Maintenance

This digital level has been designed to be a low maintenance tool. However, in order to maintain its 

performance, you must always follow these simple directions. Careful use and maintenance will extend 

the digital level’s useful life and prolong its accuracy.

 

If the level is splashed with mortar or other construction site residue, simply wipe clean with a 
damp cloth. DO NOT immerse the level in water.

 

Aluminum surfaces can be cleaned with a non–abrasive cleaning powder.

 

Store the level away from extreme temperatures below 20° F (–6° C) or higher than 140° F (60° C).

 

Your level is a precision instrument and requires reasonable care and handling. If the level has 
been dropped or severely jarred, it can seriously affect the precision of the level.

 

When the black power bar inside the battery icon disappears, turn the unit off and change the 
batteries.

Troubleshooting

Problem

Solution

The display does not light when the  

On/Off button is pushed.

…

…

Open the battery compartment, and check to ensure that batteries 
are inserted correctly.

…

…

Check the battery capacity. Replace the batteries if necessary.

…

…

The LCD display is damaged. Contact our service department for 
professional help.

Pre-Operation

PRODUCT APPLICATIONS

You can use this digital level for the following applications:

…

…

Gradient, level, vertical measuring, and checking of floor, wall, ceiling in construction, decoration.

…

…

Measuring, checking and maintenance in irrigation works, construction of bridges and roadways, 

manufacture of machines or parts, industry flat base, and others.

…

…

Locating antenna, communication equipment, and other fixtures.

TECHNICAL SPECIFICATIONS

Power Supply

2 “AAA” 1.5-Volt Batteries (not included)

Measuring Range

0-360°

Optimum Operating Temperature

32° F to 104° F (0° C to 40° C)

Accuracy of Vials

±0.029° (level or plumb)

Accuracy of Digital Display

±0.1° (level or plumb), ±0.2° (all angles)

Estimated Battery Life 

12 hours with alkaline batteries

DIGITAL LEVEL FEATURES

This digital level is a manual-leveling tool that can be used inside and outside for horizontal (level), 

vertical (plumb), and square alignment projects. It comes fully assembled (Batteries are not included). 

Please read and understand all instructions in this instruction manual before using the product.
Figure 1 and the list that follows describe the features of this level.

1

7

7

8

5

Figure 1

6 2

4

9

9

3

1.  On/ 

 /Off

 – Press and hold this button for two seconds to turn the level on. Turn the level off by pressing and 

holding the button for about two seconds. The level will automatically shut off if left idle for five minutes. When 

the level is turned on, push the button to activate and deactivate the beeper. The beeper will sound at level, 45° 

angle, plumb and the last hold angle in the memory.

2.  Hold

 – Push to “freeze” and “unfreeze” the display reading. It can also keep a record of the last reading.

1

Содержание 934 631

















Отзывы: