Use with 10 bolt 30686 base rails ONLY. Base Rails are not included with this kit.
Center Bolt Kit 32059 (sold separately) must be used when towing with a
26K hitch, Goose Neck, or Maneuvering System.
Parts Diagram
Figure: 1
20
TOOLS
3/16" drill
17/32" drill
21/32” drill
1-5/16” drill
1/2" Socket & Open End Wrench
5/8” Socket & Open End Wrench
Torque Wrench
"C" Clamps
Hardware Torque Values:
1/2” to 75 lb-ft
5/8” to 150 lb-ft
Caution:
You must remove backing paper on rubber insulator pads to properly install. Once backing paper is
removed and the rubber pads are installed; it is PERMANENT and cannot be removed. ONLY Install on the
brackets and base rails. DO NOT install rubber insulator pads on the truck bed.
Do NOT use with base rail # 31323.
Dealer /
Installer:
Provide a copy of these Instructions to the end user of this product. These Instructions provide important
operating and safety information for proper usage of this product. Demonstrate the proper use of the
product with the end user. Have the end user demonstrate that they understand the proper use of the
product.
End User:
Read and follow all instructions included in this manual. Ask your Dealer / Installer for assistance if you do
not understand the proper use of the product. Never remove any decals from the product.
WARNING!
Never exceed the
towing capacity of the tow vehicle.
Ford F150 4 Bolt Custom
Installation Bracket Kit.
Assembly, Installation, Operation and
Maintenance Instructions
P/N: 32858
