HUSABERG FE 450 AUS, Руководство по ремонту

Страница: 235 / 285

SERVICE SCHEDULE
233
S15A: every 15 service hours / after every race
S30A:
every 30 service hours
35.2
Important maintenance work to be carried out by an authorized HUSABERG workshop. (as additional order)
Competition use Hobby use S15N S45A J1A
S15A S30A S45A S30A S60A S90A
Perform a fork service. ( p. 14) • •
Perform a shock absorber service. ( p. 35) • •
Grease the steering head bearing. ( p. 27) •
Treat the electric contacts with contact spray. •
Change the hydraulic clutch fluid. ( p. 152) •
Change the front brake fluid. •
Change the rear brake fluid. •
Check wear of the clutch discs. • • • • • •
Check the clutch. ( p. 130) • •
Check/measure the cylinder. ( p. 120) • •
Change the piston. • •
Check the camshaft. ( p. 123) • •
Change the camshaft bearing. ( p. 126) • •
Check the valve spring seat. ( p. 127) • •
Check the cylinder head. ( p. 128) • •
Check the valves. ( p. 127) • •
Check the valve springs. ( p. 127) • •
Check the radial clearance of the rocker arm
rollers.
• •
Check the timing-chain tensioner function. • •
Check the balancer shaft. ( p. 115) • •
Check the crankshaft run-out at the bearing pin.
( p. 119)
• •
Change the conrod bearing. ( p. 117) • •
Change the crankshaft main bearing. • •
Check the transmission. ( p. 134) • •
Check the shift mechanism. ( p. 131) • •
Check the spring length of the oil pressure regu-
lator valve. (
p. 113)
• •
Change the glass fiber yarn filling of the main
silencer.
• •
Change the foot brake cylinder seals. • •
S15A:
every 15 service hours / after every race
S30A: every 30 service hours
S45A: every 45 service hours
S30A:
every 30 service hours
S60A: every 60 service hours
S90A: every 90 service hours
S15N: once after 15 operating hours
S45A: every 45 service hours
J1A: annually