HUSABERG 2013 TE 125 EU, Руководство пользователя

Страница: 63 / 129

11 SERVICE WORK ON THE CHASSIS
61
11.39 Checking the chain, rear sprocket, engine sprocket, and chain guide
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 44)
400227-01
Main work
–
Shift gear to neutral.
–
Check the rear sprocket and engine sprocket for wear.
» If the rear sprocket or engine sprocket is worn:
–
Change the rear sprocket or engine sprocket.
x
Info
The engine sprocket, rear sprocket, and chain should always be
changed together.
400987-10
–
Pull on the upper part of the chain with the specified weight
A
.
Guideline
Weight, chain wear measurement 10… 15 kg (22… 33 lb.)
–
Measure distance
B
of 18 chain links in the lower chain section.
Info
Chain wear is not always even; repeat this measurement at different chain
positions.
Maximum distance
B
at the longest
chain section
272 mm (10.71 in)
» If distance
B
is greater than the specified measurement:
–
Change the chain.
x
Info
When you mount a new chain, you should also change the rear
sprocket and engine sprocket.
New chains wear out faster on old, worn sprockets.
L00229-10
–
Check the chain sliding guard for wear.
» If the lower edge of the chain pins is in line with or below the chain sliding
guard:
–
Change the chain sliding guard.
x
–
Check the chain sliding guard for tightness.
» If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Screw, chain sliding
guard M6 6 Nm
(4.4 lbf ft) Loctite ® 243™