Hurco winmax, Руководство по программированию

Страница: 78 / 254

2 - 30 Basic NC G Codes
704-0115-307
WinMax Lathe NC Programming
Multiple Start Parameters
Multiple Start parameters allow you to define multiple starting points at different angles
from 0 to 359.999° around the thread. This parameter is optional.
Example—Multiple Starting Points at Different Angles
The following figure illustrates programming multiple starting points at different angles:
120°, 170°, and 190°:
G78 X.9 J.2 Z1.2 K2 F.15 D.04 E.03 P2 L.02 R3 Q-120
G78 X.9 J.2 Z1.2 K2 F.15 D.04 E.03 P2 L.02 R3 Q-170
G78 X.9 J.2 Z1.2 K2 F.15 D.04 E.03 P2 L.02 R3 Q-180
Figure 2–14. OD with multiple starts at 120°, 170°, and 180° Example
Example—Multiple Starting Points at Evenly Spaced
Angles
The following figure illustrates programming multiple starting points at 3 evenly spaced
angles: 0°, 120°, and 240°. Q3 represents 360° divided by 3:
G78 X.9 J.2 Z1.2 K2 F.15 D.04 E.03 P2 L.02 R3 Q3
Figure 2–15. OD with 3 Evenly Spaced Threads Example