Hurco winmax, Руководство по программированию

Страница: 31 / 254

WinMax Lathe NC Programming
704-0115-307
Overview
1-11
NC Editor
The NC Editor contains information about the program. You can view the NC Editor by
either opening an existing NC program or creating a new NC program and accessing the
Part Programming screen.
NC Editor provides a wide range of tools to review, create, and modify NC part programs.
The editor has the following features:
• Several ways of selecting the code, such as by dragging the pointing device
across the screen, and by using keyboard keys (if available).
• Copying/Pasting/Cutting of a block of selected code, including to applications
outside WinMax.
• Undo/Redo functionality.
• Unlimited number of tags.
• Real-time syntax check. Incorrect syntax is indicated by showing the
incorrect text in red. Comments are shown in a user-defined color (green in
this example):
• Real-time indicators of the meanings of the G codes and M codes. Place the
cursor on the G code or M code and the definition is displayed in the prompt
area of the screen.
• Simplified and friendlier access to common editing tasks, such as jumping
and searching operations.
• Keyboard shortcuts:
•
Ctrl + Home—jump to the beginning of program.
• Ctrl + End—jump to the end of program.
• Ctrl + C—copy selected text to the clipboard.
• Ctrl + F—opens a Find window. Enter text to find in the current program.
• Ctrl + G—opens a Goto window. Enter a block number to navigate to that
block.
• Ctrl + H—opens a Find and Replace window.
• Ctrl + V—paste the copied or cut text
See NC Editor Settings, on page 1 - 28 for information about the
comment color.