Hurco winmax, Руководство по программированию, Страница: 22 / 254

1 - 2 Overview
704-0115-307
WinMax Lathe NC Programming
NC Part Program Components
NC programs are a series of characters and words that form program blocks. These
program blocks tell the machine tool how and where to move. The operator needs to
understand the basic program structure and the types of codes in order to create, edit,
and run a program successfully.
Program Start
All NC programs begin with a “%” (percent) character. When a percent character is
received, the control starts to accept, check, and load blocks into its memory. If you are
creating a new part program at the control, the percent character is automatically
inserted at the beginning of the program Address Characters
In the following sample screen, the S [% indicates the beginning of the program and the
E] % line indicates the end of the program. Both characters appear automatically when
beginning a new NC program.
Figure 1–1. NC Editor Screen