Hurco AB6, Руководство по установке

Страница: 30 / 165

Introduction
Autobend 6 November, 1999 1-15
Subsystem Failure
Maintenance personnel and trained operators need to understand the
maintenance requirements and possible problems associated with the press
brake subsystems. They can become familiar with the subsystem
maintenance requirements by studying the press brake’s maintenance
manual.
Electrical Systems
Clean electrical AC power source, as defined in the ANSI/NFPA 79
standard, is essential to the successful operation and continued reliability
of the AB6. Therefore, the gauging system must be properly connected to
its power source as described in detail in this manual. The system must be
attached to a dedicated, fused, and isolated line with incoming power that
matches the specified, factory-wired, power cabinet voltages, and current
requirements of the AB6 system.
Warning
If the AB6 is not properly connected to its power
source, there may be electrical noise and fluctuations
with the power source that will affect safety,
performance, and the warranty. In addition, brown-out
conditions and surges may occur in the shop, and the
AB6 electrical components may fail and require
replacement.