EN
38
DECALCIFICATION
Decalcification is significant to ensure the valves, heating
controller and other important components stay in good
working condition.
According to water hardness coefficient, decalcification
should be taken every 3 or 4 months. Decalcification has to be
taken as soon as the reminding message
“
decalcify
”
appears
on the screen.
Please press
“
OK
”
to start decaling. Refer to following steps.
Never descaling with vinegar!
- Choose the DESCALING program, display will show
FILL DECALCIFY SUBSTANCE, PRESS OK BUTTON
- Fill water into water tank [8] and add the decalcify substance
into the water tank.
Press " OK " to start descaling. The LCD shows DESALING...
- After about 60 minutes, the water tank will be empty and the
LCD will show DESCALING FINISH PRESS " OK " TO CONFIRN
- Take out the water tank [8] and clean it, then fill more than 1
liter fresh water into the water tank. Press "OK" button.
LCD shows RINSING, the machine will be back to standby
mode after rinsing.
If the descaling is interrupted by switching off the machine, it
will automatically resume when the machine is switch back on.
Choose " DESCALING "
Descaling finished
Fill the water tank with water
and some decalcify substance.
Press " OK " button.
Fill fresh water to clean
the machine. Press "OK " .
Fresh water
Decalcify substance