HunterLab SpectraTrend HT, Руководство пользователя

Страница: 80 / 109

SpectraTrend HT User’s Guide 3.2
80
Figure 103. Results of Green Tile Check
Readings are taken in X, Y, Z and the dX, dY, dZ values are reported at the end and compared to
an individual tolerance of
≤ 0.30. To return to the DIAGNOSTICS MENU select the LEFT ARROW .
To return to the MAIN MENU select the RIGHT ARROW and to SEND the results, select the
DOWN ARROW .
Signal Levels
To examine the spectral signal levels for a sample, select the SIGNAL LEVELS by pressing the
RIGHT ARROW . Place the sample of interest at the port and press GO when ready. Normally
this will be the white tile, but HunterLab’s Technical Support staff may in struct differently. Place
the sample and press GO .
The sample and monitor channels are plotted on a graph for examination by HunterLab’s
Technical Support staff.
Figure 104. Signal Level Diagnostic