HunterLab SpectraTrend HT, Руководство пользователя

Страница: 29 / 109

SpectraTrend HT User’s Guide 3.2
29
PRODUCT SETUP
A product setup defines the operation of the system for a specific product. Up to 250 product
setups may be saved in the sensor memory.
The most obvious parameters that need to be defined are the color scale, standard color values
for the product, and the acceptable tolerances applied to those standard values. In addition,
operating parameters must be defined. These parameters are described in the rest of this
chapter.
Product setup is performed using the button pad and the LCD front panel display on the
SpectraTrend HT Sensor Head or the EasyMatch OL ST software. Product setups can be created
and modified only when the system is in Product Setup mode. Color measurements cannot be
made while you are working on a product setup. For this reason, product setup maintenance
should be done during periods when measurements are not necessary.
Setup Parameters for the Front Panel Display
Product Setups
Select PRODUCT SETUP from the MAIN MENU by moving the green cursor highlight to the
PRODUCT SETUP position using the UP and DOWN ARROW buttons on the button pad. Then
press the GO button on the button pad.
DOWN
GO
UP
LEFT
RIGHT
Figure 10. Button Pad