HunterLab Agera, Руководство пользователя

Страница: 53 / 91

User’ s Manual for Agera and EasyMatch Essentials v 1.0
53
System Settings: Preferences
Preferences: General
This allows the user to set preferences to:
Figure 81. System Settings > Preferences > General Page
•
To Load the LAST WORKSPACE AT STARTUP check this box and press APPLY .
•
To Load the LAST JOB AT STARTUP , check this box and press APPLY .
•
The STANDARDIZATION TIME INTERVAL is a useful reminder to re-standardize. Press APPLY
to set the new interval. When the time has lapsed, a prompt to re-standardize will be
displayed before measurements can be taken.
•
Set the screen BRIGHTNESS using a sliding scale and press APPLY .
•
Set the Date and Time, time zone, and format use the ADJUST CLOCK feature.
•
ENABLE NOVICE TOOLTIPS by checking on the box. Once enabled, on screen tips are displayed
for 3 seconds. To display again, roll over the LIGHTBULB ICON on the lower right part of the
screen.
Figure 82. Enable Novice Tool Tips