HunterLab Aeros EasyMatch QC, Дополнительное руководство

Страница: 16 / 31

Aeros Supplemental Manual for EasyMatch QC ver. 2.0
16
Figure 16. Standardization Complete
Sensor Manager > Measurement Configuration
To adjust the measurement parameters for the Aeros, go to SENSOR MANAGER > MEASUREMENT
CONFIGURATION . Select TURNTABLE MOTION to enable rotation. When AUTO HEIGHT is selected as a
default, the sensor head will adjust its position to read samples automatically for each sample
measurement. The
CREATE SAMPLE PROFILE button will allow the Aeros to look at the specimen and
select the optimum fixed distance from the turntable. When this is pressed, the Sensor will move to
the Top position. When profile is complete, press
OK to continue. The sample height will be shown
next to the CREATE SAMPLE PROFILE button.
The MEASUREMENT TIME is the amount of time used to average the readings together. The longer the
time, the more the averaging.
Figure 17. Sensor > Measurement Configuration