ASSEMBLY
13
Satellite-Mounted Rechargeable Battery Wand (If Applicable)
■
Route the power cable from the shade through
the bottom left corner bracket and plug into
the socket in the rechargeable battery wand
or the extension cable.
➤
If using an extension cable, plug the other
end of the extension cable into the socket
in the rechargeable battery wand.
■
Reinstall the bottom rail cover.
Proceed to "Test the Shade" on page 14.
18V DC Power Supply
NOTE:
When power is connected to the motor, a blue LED
inside the control button housing will flash to
indicate the shade is ready for operation.
■
Plug the power cable from the shade motor
into the extension cable.
■
Plug the other end of the extension cable
into the 18V DC power supply.
■
Plug the 18V DC power supply into a power
source.
Proceed to "Test the Shade" on page 14.
Power cable
from shade motor
Extension
cable
18V DC
Power
Supply
