INSTALLATION
22
Install the Bottom Channel
Install the channel with the wool pile to the window side.
■
Align the bottom channel with the inside edges of the side
channels.
■
Refer to the illustration for screw placement for your mounting
application.
■
Mark the mounting holes for the bottom channel to determine
where to drill the holes.
■
Drill the screw holes using a
3
∕
32
" drill bit approximately
3
∕
8
" deep.
■
Use the screws provided to attach the bottom channel to the
mounting surface.
Install the Plugs — Outside Mount Only
■
Cover the access holes in the channels with the provided hole plugs,
pushing them in until they are firmly seated.
■
Push the bottom plug into the bottom of the side channels.
Connect the Power
After you have hung the shade in its proper location, connect the shade
to the power source.
IMPORTANT:
To ensure proper operation at installation, each shade should be tested as you
install it.
CAUTION:
Ensure that you are able to power up just one shade at a time to do any
programming changes.
ST30 Motors
Shades equipped with ST30 motors can be ordered with one of three power supplies. All three
power supplies are RoHS compliant and operate on 50 or 60Hz.
■
Single ST30 motor shades normally ship with the single shade power supply. This power
supply operates on 100-240V AC.
■
Apply power using the 1.66-amp power supply.
Inside
Mount
Outside
Mount
Align
