Hunter Hydrawise HCC Скачать руководство пользователя страница 48

Страница: 48 / 55

the relay (LOAD OUT).

4. Check to make sure there are no exposed or loose connections.

Online Setup

This setup option is prompted when you first go through the initial setup wizard in the
software.

The online instructions will refer to a

MASTER VALVE

but this same setting applies when

using a

PUMP START RELAY (PSR).

NOTE:

With an HC Hydrawise controller, any one of your 6 or 12 zones can be configured

to act as the pump start relay. We usually recommend wiring to the last zone that is not
being used in the controller.

Does your irrigation system have a master valve?

If you need to change this in the software after the setup wizard, refer to the instructions
below.

1. Log in to your Hydrawise account
2. Click on

ZONES AND SCHEDULES

for the PC or

ZONES

if using the mobile app.

3. Choose

YES

from the drop-down menu above the zones. If you have an HC controller,

choose the zone number to which you have the master valve wired.

HC Controller

PRO-HC, HPC, and HCC Controllers

Содержание Hydrawise HCC























































Результаты поиска

Содержание Hydrawise HCC

Отзывы:

Бренды по названию

Популярные бренды

Hunter Hydrawise HCC, Руководство пользователя

Результаты поиска

Содержание Hydrawise HCC

Отзывы:

Бренды по названию

Популярные бренды