Hunter Hydrawise HCC, Руководство пользователя

Страница: 17 / 55

telephones operating in the 2.4GHz range (you could also change the channel your
phone uses).
Note that the Hydrawise unit is designed to work in poor wireless environments. However, if
you wish to manually run or stop a zone and the wireless signal is down then these actions
will fail.
Offline
If the controller loses internet for more than 24 hours you’ll receive a notification email.
The controller will go into an offline mode. In offline mode, your controller won’t be able to
access local weather conditions such as rainfall or evaporation and will revert to a pre-
defined program.
For Smart Watering zones, the controller will adjust each zone’s watering length based
on your offline watering budget and will water at each zone’s configured peak watering
frequency.
For Time Based Watering zones, the controller will adjust each zone’s watering length
based on your offline watering budget and will water at each zone’s configured
watering frequency.
For more information on Smart and Time Based Watering, see “Configuring Irrigation
Zones”
[6]
.
Note that Cycle & Soak is not supported in Offline Mode and each zone will water for
its full watering length without pausing.
The controller will only water at your configured Program Start Times.
Saving Settings
The controller does not need a battery, all settings are saved in a non-volatile RAM
(memory).
Serial Number
The serial number is used to link your actual controller with your Hydrawise account. This
number is also printed on the rear of the controller.
Copyright 2020 Hunter Industries. All Rights Reserved. 17