Hunter GSP9200 Touch, Руководство по эксплуатации

Страница: 41 / 88

BALANCING PROCEDURES 33
Touch the SmartWeight® button to display the
SmartWeight® menu buttons.
Figure 113.
Select the Disable SmartWeight® button.
Figure 114.
The balancer is now in traditional dynamic balancing
mode.
Figure 115.
When changing to traditional dynamic balancing
mode, weight amounts as well as weight
placement locations change.
Figure 116.
Figure 117.
3.8 Balance Modes
SmartWeight® Balancing Technology
SmartWeight® Balancing Technology is a method
of reducing forces on a wheel during balancing.
SmartWeight® is not a procedure. Instead, it measures
the forces of side-to-side movement and up-and-down
shake and computes weight to reduce these forces. This
reduces the amount of correction weight used, balancing
time required, check spins needed and “weight chasing”.
SmartWeight® saves the shop time and money.
Figure 112.
Dynamic Balancing – Traditional Balancing
Mode
SmartWeight Balancing Technology® is the
default balancing method and is the most
recommended way to accurately balance wheel
/ tire assemblies.
Enter wheel dimensions before selecting
dynamic balancing. If SmartWeight® mode is
enabled in setup, the balancer will return to
SmartWeight® balancing upon dimension entry.
Dynamic balancing will always display two weight
planes. It provides a more complete balance than static
balancing. Dynamic balancing should be selected
whenever possible to minimize vehicle vibration.
Switching from SmartWeight Balancing
Technology® to Traditional Dynamic Balancing
At any time, SmartWeight Balancing Technology® can
be switched to standard balancing provided that both
standard and SmartWeight® balancing modes are
enabled in setup.