4
©2010 Hunter Fan Co.
41773-01 20100609
How THe HePaTeCH™ SySTem workS
oPeraTIng your aIr PurIfIer
The display and control keys allow for easy
operation of the air purifier.
UP/DOWN KEYS: Adjusts the
blower speed and turns the unit on
and off.
Pre-filter Reset: Resets the
Carbon Pre-Filter Life Counter.
FILTER RESET: Resets the
HEPAtech® Filter Life Counter.
IONIZER KEY: Turns the ionizer on
and off.
Use the UP/DOWN keys to adjust the blower
speed to the desired level
= Off
= Low
= Medium
= High
Figure 2.
Dust &
Irritants
Pollen &
Allergens
Odors Bacteria
Pet Hair &
Dander
Carbon
Pre-
filter
HEPAtech™
Filter
99.97% – .1
Microns
Ionizer
The above is an illustration of how the
HEPAtech™ air purification system works.
Dust and other irritants are pulled into the air
purification system and cleaned through the
Carbon Pre-Filter, HEPAtech™ Filter, and by
the ionizer. Clean, purified air is then released
into the room through the top grill.
uSIng THe IonIzer
Using the ionizer improves the quality of air in
the room. Negative ions are released into the
air and positively charged dust, smoke, and
pollen particles are attracted to the negative
ions. These particles settle out of the air and
can be vacuumed up during normal cleaning.
These particles are also more easily captured
by the HEPAtech™ filter as they pass through
the HEPAtech™ Air Purification System. To
ensure the best air circulation in the room, we
recommend that you place your air purifier six
(6) inches away from any walls.
NOTE:
DO NOT run the ionizer if tobacco
smoke, air fresheners, dripless wax candles,
or grease from cooking is present.
1. To turn the ionizer on, press the IONIZER
key. The Ionizer Indicator will appear on the
display. Refer to Figure 3.
2. To turn the ionizer off, press the IONIZER
key. The Ionizer Indicator will disappear.
Figure 3.
