Hunter 28537, Руководство по установке и эксплуатации

Страница: 6 / 12

6
Hunter Fan Company 41888-01 • 02/01/05
7
41888-01 • 02/01/05 Hunter Fan Company
You can assemble your fan for standard mounting (steps 3-1 – 3-2) or
for low profile mounting (steps 3-3 – 3-4).
3-1. To assemble fan to hang down from a flat or angled ceiling, insert
the downrod through the canopy and canopy trim ring. Feed the
wires from the fan through the downrod.
3-2. Screw the downrod into the fan assembly. Tighten the allen head
set screw using the included allen wrench. Skip to Step 3-5.
CAUTION: e downrod has a special coating on the threads.
Do not remove this coating; the coating prevents the downrod from
unscrewing. Once assembled, do not remove the downrod.
3-3. To assemble the fan to hang from a low ceiling, place the low
profile washer (lip up) into the canopy. Be sure the green ground
wire is pointing up toward the ceiling.
Note: For low profile mounting, the downrod is replaced with the
low profile washer. See Steps 3-3 – 3-4.
3-4. Align the holes in the washer with the holes in the adapter.
Assemble securely with three #8-32 x 1” screws.
3-5. Raise the fan and place the hook on the ceiling plate through the
U-shaped hole in the rim. Go to 4 • Wiring the Fan .
WARNING: Fan may fall if not assembled as directed in these
installation instructions.
Steps 3-3 – 3-4
3 • Assembling and Hanging the Fan
#8-32 x 1” Screw
Low Profile Washer
Step 3-5
U-shaped
Hole
Steps 3-1 – 3-2
Downrod
Canopy
Canopy
Trim Ring
Allen Head
Set Screw
Adapter