HTC-65GNV HIGH RESOLUTION
HTC-65CNV MED. RESOLUTION
DAY&NIGHT CCD CAMERA
SPECIFICATOINS
ITEM NO. HTC-65C
HTC-65G
PICK UP DEVICE
CCD IMAGE SENSOR 1/3”
ELEMENTS H*V
NTSC: 512*492—PAL: 512*582
NTSC: 771*492—PAL: 753*582
HORIZONTAL RESOLUTION More than
40
0 TV Lines More than
5
4
0 TV Lines
SYNCHRO FREQUENCY
NTSC: 15.734 kHz – PAL: 15.625 kHz
CLOCK FREQUENCY
NTSC: 59.94Hz – PAL: 50Hz
SCANNING SYSTEM
2 : 1 INTERLANCE
SENSITIVITY D/N
1/0.05 Lux F=1.2
2/ 0.08 Lux F=1.2
SYNCHRONIZATION LINE
LOCK
S/N RATIO
MORE THAN 50 dB (AGC Auto)
VIDEO OUTPUT
1 Vpp, 75 Ohms Composite
AUTO IRIS
Video Driver / DC Driver Switchable
MOUNT LENS
CS Mount
POWER SUPPLY 24 VAC
or 12VDC
(± 10%)
POWER CONSUMPTION
3.5W for 24VAC
4W for 24VAC
AES(ELECTRONIC SHUTTER)
Up to 1/100,000 sec. (linear) ON/OFF Switchable
D/N (day & night)
Normal image, Day & night ON/OFF Switchable
IR RAY (acceptable)
850
～
940nM INFREDRAD WAVE LENGTH
DIMENSIONS (mm)
102 (D) * 59 (W) * 59 (H)
WEIGHT (g)
430
STORAGE TEMPERATURE
-30 to + 60 Degree C
OPERATON TEMPERATURE
-10 to + 45 Degree C
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
CAUTIONS
1. In order to protect the camera, avoid placing or using it under direct sunlight, rain or dust.
2. Don't touch the CCD sensor directly with your fingers. If necessary, use soft cloth moistened with alcohol to wipe off the
dust.
3. When the camera is not in use, keep the lens, or cap being attached to protect the CCD sensor.
4. DC model: use a + 12V regulated power source.
AC model: directly connect to AC power source.
5. Don’t drop your camera or give it a strong shock or vibration.
CONNECTION
1. Before connection, make sure that power of all units are OFF and cords are unplugged.
2. Mount a lens onto the camera.
3. Connect a video terminal of the camera and the video input terminal of a monitor TV
with a 75
Ω
coaxial cable.
4. Connect the power terminal of the camera to a power supply.
Caution:
* Installation should conform to all local codes.
* Lens, coaxial cable for video signal and power supply are not supplied with the camera.
LOCATIONS
、
FUNCTION OF PARTS & ACCESSORIES
STEP
Attach the Lens
Connect to a monitor TV
Connect a power source
Adjust the focus
Adjust the back focus
