Hunt Graphics Image 6100, Руководство пользователя

Страница: 13 / 53

13
3
H
OPERATING CONDITIONS______________________________________________________________________
FIGURE 4. WORKING AREA DIAGRAM
An area 15’(4.5 m) x 11’(3.4m) is the smallest area recommended.
We recommended a room size of 20‘ x 18‘ or (6.1 x 5.49 m) to accommodate a laminator and 2 (4’ x 8’) tables on castors for finishing/ layout
work. This area is required for loading / unloading rolls of media onto the supply shafts and feeding / receiving the maximum mounting board
lengths into the laminator correctly.
TEMPERATURE
50
°
to 122
°
F (10
°
to 50
°
C)
*
IMPORTANT: Do not expose the
laminator to direct sunlight as output quality
may be affected.
MOISTURE
30 – 95% non-condensing
Ideal Humidity – 55%
Too much humidity will affect the prints the
operator is laminating causing problems with
film adhesion.
DUST
Avoid a dusty environment. Because the films
used are slightly static they will attract dust
and the output will be affected. Working in a
clean and tidy manner will minimize poor
quality output and production waste.