background image

1

532319-2_B

HELIX® 5 SERIES IN-DASH MOUNTING 

Installation Guide

Installation Overview

Following are instructions for the in-dash mount installation of the HELIX 5 control head. We 
encourage you to read this guide before starting the installation, so you may understand the 
installation requirements.

Technical Support:

 If you find that any items are missing from your installation kit, visit our Web site 

at 

humminbird.com

 or contact Humminbird Technical Support through our Help Center at 

https://

humminbird-help.johnsonoutdoors.com/hc/en-us

.

Supplies:

 In addition to the hardware supplied with your accessory, you will need a drill and various 

drill bits, a cutting tool for the dashboard material, safety glasses and dust mask, rubbing alcohol, 
and masking tape.

NOTE:

 

The illustrations in this manual may not look the same as your product, but your product will 

function in the same way.

1

 

|

  Plan the Mounting Location

Start by locating a suitable, flat area of the dashboard for mounting. Consider the following to find 
the best mounting location:

 

∆ Interference:

 The mounting location must provide adequate distance from electric motors or 

any equipment that may cause electronic interference.

 

∆ Stability:

 The mounting area should be protected from waves, shock, vibration, and water.

 

∆ Depth:

 The mounting area should have a depth of 3 inches (7.62 cm) to allow space for the 

control head and cables.

 

∆ Ventilation:

 The area beneath the mounting surface should be well-ventilated.

 

∆ Accessibility:

 The location should be easily accessible for all cables to reach the ports on the 

back of the control head.

NOTE: 

If a cable is too short for your application, extension cables are available. For assistance, 

contact Humminbird Technical Support through our Help Center at 

https://humminbird-help.

johnsonoutdoors.com/hc/en-us

.

VIEW

MENU

EXIT

7.55 in (191.77 mm)

4.28 in

 (108.71 mm)

2.90 in (73.66 mm)

2.17 in (55.12 mm)

HELIX 5 Series In-Dash Mounting Dimensions

2

 

|

  Cut the In-Dash Mounting Hole

To in-dash mount the HELIX control head, start by placing the components on the surfaces where 
you intend to install them. 

1.  Review the instructions, measurements, and cutting options indicated on the In-dash Mounting 

Template. 

2.  Tape the template to the chosen in-dash mounting location. 

Содержание HELIX 5 SERIES









Отзывы: