Humbaur 4000 Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 26

Humbaur 4000 Series Скачать руководство пользователя страница 2

2

Version 2019/01

Operating Instruction Manual HKT (Part 2)

Notes on use/Target group

PART 2 - Original - "HKT -

lowerable trailer

" Operating Instruction Manual

This "HKT -

lowerable trailer

" operating instruction manual (Part 2) is intended for you as a user of a ready-to-use trailer.

It provides detailed steps on how to handle the HKT trailer. It contains all of the relevant details on safe operation,
care/cleaning, maintenance/servicing, troubleshooting and decommissioning/disposing of the trailer.
This specific operating instruction manual (Part 2) for your trailer is on the enclosed CD. You can also download it
from

www.humbaur.com under the section: Download - Operating Instructions

.

PART 1 - "Trailers up to 3.5 to" (General Points)

For all other general information on car trailers, see the operating instruction manual, "Trailers up to 3.5 to"
(General Points - Part 1).

•

PART 1 and PART 2 together form the complete documentation for your trailer, which you as the user should have
at your disposal.

Read this operating instruction manual carefully and completely before using your trailer for the first time and
observe all of the instructions, safety information and warnings. Comply with the steps for handling the trailer.

•

Non-observance of any of the documentation can cause injuries to you and to other persons or can cause material damage.

•

Non-observance may invalidate your guarantee entitlement.

•

Keep this operating instruction manual in a safe place for the entire service life of your trailer.

•

It forms part of the product and also serves as a CHECK LIST for regular inspections of your trailer.

•

We advise you to store the operating instruction manual in the driver's cab and to keep it at hand in case you need to
consult it.

•

It should be passed on to the new user/owner if you rent out or sell your trailer.

In addition, as a road user, you are obliged to observe all national regulations for driving a vehicle and trailer and to
comply with your obligations as the owner of a commercial vehicle.

•

This includes carrying out regular maintenance and care tasks and periodically subjecting your trailer to an overall
technical inspection.

•

You must make sure that you are aware of any special stipulations that are specific to your country.

Name and address of dealer:

Name:

Address:

Telephone:

►

►



►

►

Please enter the name of your dealer.

►

►

Name and address of manufacturer:

Humbaur GmbH
Mercedesring 1
86368 Gersthofen
Germany

Tel. +49 821 24929-0
Fax +49 821 249-100

[email protected]
www.humbaur.com

«
1
2
3
4
...
»

Содержание 4000 Series



























Отзывы:

Нет отзывов