manualshive.com logo in svg

Humbaur 3000 Series, Руководство по эксплуатации

Серия Garmin 3000 - это передовые навигационные устройства с богатой спецификацией. Скачайте бесплатное руководство по эксплуатации с manualshive.com, чтобы ознакомиться с функциями и настройками этого продукта. Узнайте больше о возможностях Garmin 3000 и оптимизируйте свои путешествия.

Поделиться
Скачать
background image

7

Electro-hydraulic equipment

90

MACHT’S MÖGLICH

Testing, care and maintenance

Safety instructions / warnings

The electro-hydraulic equipment (motor, hydraulic 
tank, hoses, electric cables, and connections) is 
low-maintenance.

However, the equipment needs to be regularly checked for 
damage, ageing, fracture, and material fatigue.
Maintenance / repair work may only be carried out by 
trained and qualified personnel.
The electro-hydraulic equipment for powered operation of 
the loading bridge is subject to the Machinery Directive 
2006/42/EC.

The electro-hydraulic equipment may only be 
operated by trained personnel!
Maintenance / repair work on the electro-hydraulic 
equipment may only be carried out by trained and 
qualified personnel in a specialist workshop!

Read and follow the safety instructions from the 
battery manufacturer.

Batteries are subject to the EU Directive 2006/66/
EC and can be returned free of charge to the 
manufacturer.
The utmost of caution must be exercised when 
removing/replacing the supply battery!

NOTICE 

Using the pressure washer!

The electro-hydraulic equipment and batteries or hydraulic 
hoses could be damaged if cleaned with a high-pressure 
cleaner.

Be especially careful when cleaning the trailer with high-
pressure cleaners.

Do not aim the water stream directly at the electro-
hydraulic equipment / hydraulic hoses / electrical cables 
/ batteries.

Fig. 17

Cleaning sensitive components/chassis

Batteries and rechargeable batteries are waste 
which has to be specially disposed of. They may 
not be disposed of in household waste or in the 
environment under any circumstances.
Hydraulic oil may not enter the environment!
Leaks must be repaired immediately!

WARNING

Danger when handling batteries!

The battery can explode as a result of spark 
generation or short circuits.

Use , .

Avoid short circuits and the formation of sparks.
- Do not place any tools / objects on the
batteries.

Cover the terminals of the batteries prior to starting work 
on batteries.

 Do not smoke and keep naked

flames away.

WARNING

Leaking battery acid!

Battery acid is corrosive, and if it comes into 
contact with you there is a danger of severe injury.

You must consult a doctor immediately in the 

event of contact.

WARNING

Hot batteries!

Bridged batteries can become hot - burn hazard!

Allow the battery to cool down before you start 

working on it.

WARNING

Burn hazard!

Unintentionally bridged batteries are hot!

Eliminate the bridge-out if possible.

Allow the batteries to cool down before you start mainte-
nance and servicing work.

WARNING

Leaking hydraulic oil / lines under pressure

Hydraulic oil escaping under pressure can cut the skin / 
cause skin irritations!

Before commencing maintenance work on the hydraulic 
system, ensure that the lines are not under pressure and 
/ or they have been disconnected from the towing 
vehicle.

Use , .

W - 014

Содержание 3000 Series











































































































Отзывы:

Нет отзывов

Похожие инструкции для 3000 Series

Morooka MST-800VD Operation & Maintenance Manual preview
MST-800VD
Бренд: Morooka Страницы: 134
J&J Amusements Double Eagle - Electric Service Manual preview
Double Eagle - Electric
Бренд: J&J Amusements Страницы: 275
Logan CONTRACTOR Owner'S Manual preview
CONTRACTOR
Бренд: Logan Страницы: 28
TGA BREEZE S Operating Instructions And Owner'S Handbook preview
BREEZE S
Бренд: TGA Страницы: 16
Yerf-Dog Fun-Kart 3203A Owner'S Manual preview
Fun-Kart 3203A
Бренд: Yerf-Dog Страницы: 21
Bad Boy Ambush IS Owner'S Manual preview
Ambush IS
Бренд: Bad Boy Страницы: 143
jcb Groundhog 6x4 Service Manual preview
Groundhog 6x4
Бренд: jcb Страницы: 227
Polaris Magnum 500 2000 Owner'S Manual Supplement preview
Magnum 500 2000
Бренд: Polaris Страницы: 5
Polaris R-12-03-01 Manual preview
R-12-03-01
Бренд: Polaris Страницы: 13
Polaris 600 IQ Widetrak Owner'S Manual preview
600 IQ Widetrak
Бренд: Polaris Страницы: 140
Polaris 2008 Scrambler 500 2X4 International Owner'S Manual preview
2008 Scrambler 500 2X4 International
Бренд: Polaris Страницы: 124
Polaris Supersport 2007 Service Manual preview
Supersport 2007
Бренд: Polaris Страницы: 266
Yamaha YT175J Condensed Service Data preview
YT175J
Бренд: Yamaha Страницы: 10
Yamaha YFM660FP 2001 Assembly Manual preview
YFM660FP 2001
Бренд: Yamaha Страницы: 30
Yamaha WARRIOR YFM350XP Supplementary Service Manual preview
WARRIOR YFM350XP
Бренд: Yamaha Страницы: 29
Textron Stampede 900 2017 Repair And Service Manual preview
Stampede 900 2017
Бренд: Textron Страницы: 237
Sym Quad Raider 600 Service Manual preview
Quad Raider 600
Бренд: Sym Страницы: 247
PowerMax ROUGH-RIDER 700 UTV Maintenance Manual preview
ROUGH-RIDER 700 UTV
Бренд: PowerMax Страницы: 124

Бренды по названию

Популярные бренды

Загрузить еще бренды