manualshive.com logo in svg

Humanscale TouchPoint T7, Руководство пользователя

Поделиться
Скачать
Humanscale TouchPoint T7 Скачать руководство пользователя страница 62

System

"Please Enter User Height"

Preset Screen - User selects height to be 
entered for 1 of 6 presets

Error

"Cart Adjustment Was 
Interrupted! Clear Perimeter 
and Continue"

Collision Detection - User must ensure that 
collision hazard is removed and then select 
"RESUME"

Error

"Cart Adjustment Was 
Interrupted!" Clear Perimeter 
and Enter User's Height."

Collision Detection - User must ensure that 
collision hazard is removed, select "OK" and 
then re-enter desired height

System

"PowerTrack Enabled"

None

15.0 WARRANTY

For warranty and terms and conditions, please visit www.humanscale.com

16.0 FCC COMPLIANCE STATEMENT

TouchPoint T7

 

 

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment 
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required 
to correct the interference at his own expense.

Changes or modifications made to this device that are not expressly approved by Humanscale Corporation may void the 
user’s authority to operate the equipment.

Innovation, Science and Economic Development Canada ICES-003 Compliance Notice:

  

This Class A digital apparatus complies with Canadian ICES-003.  

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

© 2019 Humanscale. All rights reserved. Patent pending. Humanscale is a registered trademark of Humanscale Corporation. Reproduction of this  
material in whole or part for any purpose other than that authorized by Humanscale is prohibited.  
 
                                                                                                                                                                                                                                           

HSIT70513 

61

Return to Table of Contents

Содержание TouchPoint T7































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды