manualshive.com logo in svg

Humanscale TouchPoint T7, Руководство пользователя

Поделиться
Скачать
Humanscale TouchPoint T7 Скачать руководство пользователя страница 49

10.2 CART CLEANING

The following procedures are not guaranteed to control infection. Consult the hospital infection-control administrator or 

epidemiologist regarding specific cleaning procedures and processes.   

 

 

Always unplug the T7 and power it down before cleaning.   

 

All exterior surfaces, excluding electrical components, will withstand cleaning by most commonly  

 

used, diluted, non-abrasive solutions such as quaternary ammonium compounds, ammonia, enzyme  

 

cleaners, bleach and alcohol solutions.

 

 Pen and permanent and dry-erase marker can be removed with 91% isopropyl alcohol and a soft cloth. 

 

Iodine stains can be removed with commonly used cleaners and a soft cloth.  

 

Never clean the T7 with steel wool or other abrasive materials that will damage the surface finish.   

 

 Do not rub a wet or damp cloth over any electrical components. Do not immerse  

the T7 or its components in liquid or allow liquids to flow into internal compartments  
or over any electrical components. Thoroughly dry all surfaces after cleaning.

 

 Do not use flammable cleaners on T7 surfaces due to close proximity of electrical  

power and equipment. 

 

 It is recommended that any cleaning solution be tested on a small, inconspicuous area  

to ensure surface is not harmed. 

48

Return to Table of Contents

Содержание TouchPoint T7































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды